How to connect the fish tank water pump
In the process of fish farming, the water pump is an important equipment to maintain the water quality and oxygen supply of the fish tank. Properly installed water pumps not only ensure water circulation but also extend the life of your equipment. This article will introduce in detail the installation steps, frequently asked questions and purchase suggestions for fish tank water pumps to help novices easily complete the connection.
1. Connection steps of fish tank water pump
1.Preparation: Make sure the water pump power matches the fish tank capacity, and prepare hoses, suction cups, power supplies and other accessories.
2.Installation location: The water pump is usually placed at the bottom or side wall of the fish tank, avoiding the viewing surface.
3.Connecting hose: Put one end of the hose on the water pump outlet, and extend the other end to the filter tank or oxygen spray port.
4.Fixed water pump: Fix the water pump with a suction cup or bracket to avoid vibration and displacement during operation.
5.Power on test: Check whether the water flow direction is normal and whether there is any abnormal noise or water leakage.
| steps | Operational points |
|---|---|
| 1. Preparation | Check whether the accessories are complete and whether the water pump power is appropriate |
| 2. Installation location | Keep away from the viewing surface and ensure that the water flow covers the entire tank |
| 3. Connect the hose | The hose is of moderate length to avoid bending |
| 4. Fixed water pump | Use suction cups or brackets to prevent displacement |
| 5. Power on test | Observe water flow, noise and leaks |
2. Common problems and solutions
| question | Reason | Solution |
|---|---|---|
| water pump not working | The power is not connected or the motor is faulty | Check sockets, power cords, or replace water pump |
| Water flow is small | The filter material is clogged or the power is insufficient. | Clean the filter material or replace the high-power water pump |
| Too much noise | Unstable installation or worn rotor | Reseat or replace the rotor |
3. Suggestions for purchasing water pumps
1.Traffic selection: Calculated based on the volume of the fish tank, the general water circulation volume per hour is 3-5 times the total water volume of the fish tank.
2.Silent design: Choose a DC variable frequency water pump with lower noise.
3.Energy saving: Give priority to products with high energy efficiency levels to save energy during long-term use.
| Fish tank capacity (liters) | Recommended water pump flow rate (L/H) |
|---|---|
| 30-50 | 300-500 |
| 50-100 | 500-1000 |
| 100-200 | 1000-2000 |
4. Precautions
1. Clean the water pump filter regularly to prevent clogging and affecting flow.
2. Avoid running the water pump dry for a long time to avoid burning out the motor.
3. When using it for the first time, observe whether the fish adapt to the intensity of the water flow.
Through the above steps and precautions, you can easily complete the installation and maintenance of the fish tank water pump and provide a healthy living environment for the fish!
check the details
check the details
en
